Description
Ridetech Level 3 Suspension Package – 67-69 Camaro
Building a wicked Camaro? Are you wanting the ultimate in bolt in performance and ride quality? The level 3 Street Challenge package has all of your bases covered. The Street Challenge kit is specifically engineered to exceed your driving expectations no matter if it is Road Atlanta with a helmet on or I-70 west out of Denver with a trunk full of luggage.
The Level 3 “Street Challenge” system includes the best of every option we have to offer. Upgrades like StrongArms, MuscleBars, and the RidePRO Digital control system are included. The Level 3 package also offers the best value by including a discount when the entire system is purchased together.
Front System
ShockWave®
The ShockWave® mounts much like a coilover and replaces both the coil spring and the shock absorber. The Shockwave kit bolts in using the existing upper shock mount. The Shockwave system lower the vehicle from the factory ride height and provides the ability to go even lower when not being driven by lowering the air pressure further.
StrongArms
StrongArm tubular control arms not only improve suspension geometry and handling, they also make installation even easier. The added benefit when replacing control arms is new bushings and ball joints. No more worn out components.
MuscleBar
The most overlooked suspension component is also one of the most important. The magic you could be missing in your suspension may be nothing more than simply adding or upgrading your swaybar. The new Musclebar sway bars were developed specifically for lowered vehicles and will greatly enhance the cornering performance of your vehicle ( Not to mention they’ll also make some vehicles safer at the speeds we travel on today’s interstate highways.
Ridetech Tall Spindles
It is called a TALL Spindle because the upper ball joint is raised 1-1/2″. Different from the factory design, it yields a better camber change during suspension movement. Pivot points are determined by the ball joints on the spindles and bushing locations on the frame, not the control arms. These spindles are STEEL, the strongest ones in the industry.
Billet Tie Rod Adjusters
Strong, easy to adjust and look cool too. Large wrench flats on both ends provide an easy way to dial your suspension anodized aluminum finish provides long lasting good looks.
Rear Suspension
AirBar®
The AirBar® system is a 4-link rear replacement that eliminates the use of OEM leafsprings. Installation of this system is fairly simple and only relies on the end user to weld 4 small tabs witch locate the upper bars to the axle. (All welding is done to the axle not the body) The original front leafspring hangers locate the new lower bars in the front and the stock axle pad locates the opposite end.(Note: if ordering a new rear axle, order to fit O.E.M suspension) The upper cradle assembly bolts into the stock frame on the car and locates the upper bars and shockwave mounts. With this kit installed you will notice a dramatically improved ride quality with superior handling performance.
Control System
RidePro® Digital
The Level 3 package comes equipped with Ridetech’s Airpod Digital compressor system outfitted with 2 compressors and a 5 gallon tank, and includes level sensors for increased accuracy.
