Description
Notchead Hard Line Clamp Builder Kit
Quick, Safe and Professional
Centered set screw means you drill and tap holes right where you want your line to go. Lines easily ‘snap in’ with a push of your finger and eliminate the need for Z-bends to adjust for fittings.
Made from high strength Copolymer Acetal plastic, NotcHead Line Clamps are heat-resistant with a melting point of 330deg F, have low moisture sensitivity, are very wear resistant and easy on painted parts.
After the line is installed, the set screw is completely hidden, giving a clean, elegant look.
NotcHead clamp names are in relation to the hose it is designed to hold. Most hose sizes are named for the Inside Diameter they have so check the list below to see if there is a size our Clamps will fit what you need.
| Part# | Description | Inside Diameter of Clip |
| Hard Line Series | Approx./Actual | |
| 1316-6 | 3/16in Hard Line | 3/16in / .1875 |
| 1416-6 | 1/4in Hard Line | 1/4in / .250 |
| 1616-6 | 3/8in Hard Line | 3/8in / .375 |
| 1816-6 | 1/2in Hard Line | 1/2in / .500 |
| Braided Line Series | ||
| 2316-6 | -3AN Braided Line | 1/4in / .234 |
| 2416-6 | -4AN Braided Line | 7/16in / .438 |
| 2616-6 | -6AN Braided Line | 9/16in / .531 |
| 2816-6 | -8AN Braided Line | 5/8in / .620 |
| Soft Line Series | ||
| 3080-6 | 1/2in Soft Line and #6 A/C | 3/4in / .745 |
| 3100-6 | 5/8in Soft Line and #8 A/C | 7/8in / .870 |
| 3120-6 | 3/4in Soft Line and #10 A/C | 1in / .990 |
| Fire Wall Grommet | ||
| 4500 | #6 Fire Wall Ring | 3/4in / .780 |
| 4600 | #8 Fire Wall Ring | 7/8in / .910 |
| 4700 | #10 Fire Wall Ring | 1in / 1.018 |
