Description
Ididit Retrofit Tilt Floor Shift – 73 Chrysler B-Body
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Finish | Black, Chrome, Steel |
| Vendor | |
| Part Number |
Installation Kits
Original Harness
For vehicles with an original factory harness, a 4-way flasher kit is included in your installation kit. This 4-way flasher kit will not only add safety to your vehicle, but will also convert your original wiring harness to the 3 7/8″ plug found on your ididit column.
Aftermarket Harness
Many aftermarket wiring companies offer replacement harnesses that incorporate a 4-way flasher unit as well as the flat 3 7/8″ plug. If you are using one of these harnesses, a 4-way flasher kit is not necessary.
Floor Mount
A new floor mount is required for ALL installations. The original will not fit the ididit steering column.
Power Box
A rag joint is required if using a power box. The rag joint has 2 different functions. One, as a coupler between the lower shaft of the column and the input shaft of the gearbox. Two, as a vibration reducer which helps isolate pulsations commonly felt from the power steering pump.
Manual Box
If using the original box the shaft will need to be cut and modified and a coupler will need to be installed.
No Box Specified
If you are unsure whether you are using a box or a rack, give us a call and we can help determine what you have and what application will work the best.
Important Notice
Proposition 65
In late 2016, California adopted new regulations known as "Proposition 65", which altered the Safe Drinking Water and Toxic Enforcement Act of 1986. For more information, goto: www.P65Warnings.ca.gov
For more information about what chemicals this a particular product may contain that are covered by California Proposition 65, please visit the manufactures website.
